Harting Crimp-Tools

The service tool for the technician on site.

with locator 09990000022 for Han D und Han E
Locator 09990000343 for Han-Yellock has to be ordered separate!

use for following crimp contacts:

Locator for Hand-Crimping-Tool 09990000021

use for:
Han-Yellock

for replacement
Locator for Hand-Crimping-Tool 09990000021

use for:
Han D
Han E

Harting crimping tool for Han C, Han D, Han E
with locator
wire gauge 1,5 - 4 mm˛ for Han C
wire gauge 0,14 - 1,5 mm˛ for Han D
wire gauge 0,5 - 4 mm˛ for Han E
wire gauge 0,5 - 4 mm˛ for Han-Yellock

Robust standard handtool with very good performance.
scope of delivery:
incl. locator for Han D, Han E, Han C

Locator 09990000341 for Han-Yellock has to be ordered separate!

Locator for Hand-Crimping-Tool 09990000110

use for:
Han-Yellock

for replacement
Locator for Hand-Crimping-Tool 09990000110

use for:
Han D,
Han E,
Han C

use for male and female Crimp contacts AWG 26 - 12:

scope of delivery:
Positioner and directions for use

Positioner for Four-Indent Hand-Crimping-Tool 09990000888
spare part

use for:
Han D,
Han E,
Han-Yellock,
Han C

Go / no-go gauge for handtool 09990000888

crimping tool for Han C contacts with high wire gauges
wire gauge 4,0mm˛, AWG12, 6,0mm˛, AWG10 and 10,0mm˛, AWG8

with positioner

Daniels (DMC) handcrimping tool for turned male and female contacts
4 ident crimp in acc . to MIL 22 520/2-01
wire gauge 0,09 up to 0,82mm˛, AWG32 - 20

without locator - locator has to be ordered separately!

locator for Daniels (DMC) hand crimping tool 09 99 000 0501
for D-Sub contacts AWG18-28, 0,82-0,09mm˛

locator for Daniels (DMC) hand crimping tool 09 99 000 0501
for D-Sub contacts 09930005576 + 09930005476

HARTING hand crimping tool for LWL-connectors
SC, F-SMA F-ST,
SW 3,8 mm, SW 4,3 mm, SW 4,95 mm,
for crimping the strain relief to the connector F.O. cable for glass fiber

HARTING hand crimping tool for LWL-connectors (plastic-fibre)
SW 6,95 mm, SW 4,95 mm, SW 3 mm
for crimping the strain relief to the connector F.O. cable for plastic fibre

HARTING four-ident hand crimping tool
for following 1 mm POF LWL-connectors:
Han D ® , Han E ® , DIN 41 626, Ferrule, F-SMA, -ST

for turned contacts 0.14-1.0; 1.5, 2.5 and 4.0mm˛

can be used u. a. for:

for assembling of Harting RJ Industrial Gigalink Cat. 6A connectors
straight action principle
ratchet release
cross section range AWG28/7 - 24/7; 0,10 - 0,25mm²

Harting crimping tool for coaxial contacts

Harting crimping tool for stamped D-Sub contacts 0,09 - 0,56 mm˛
2 Crimp nests AWG 28-24 and AWG 26-20

locator for BUCHANAN crimping tool
Han D

locator for BUCHANAN crimping tool Han C

locator for BUCHANAN crimping tool Han E

depth adjustment gauge tool for BUCHANAN crimping tool