Harting Contact Inserts Han-Brid®
| • | Han-Brid Cu | 4-pole + PE | 50 V / 10 A |
| • | Han-Brid Quintax | 4-pole + PE | 50 V / 10 A |
| • | Han-Brid RJ45 | 2-pole + RJ45 | 50 V / 10 A |
| • | Han-Brid USB | USB | |
| • | Han-Brid Firewire | Firewire | |
| • | Han-Brid LWL | 4-pole + PE | 50 V / 10 A |
| • | Han 4A SC | 4 x SC |
Han-Brid Cu
- for termination of a shielded twisted pair
- Insert for Han D® male or female contacts
- Connection of the shield by means of shielding plate and fixing clamps
- Connection of the device side can be realised either by a printed circuit board as a modular version or as part of the appliance PCB
- Insert for bulkhead mounted or cable to cable housings are always equipped with a screening spring
- Active bus terminator in standard Han® 3 A hoods and hous-ings
- Power supply to the termination network via electrical contacts of Han-Brid®
- Integrated, galvanically separated DC/DC converter 24 V / 5 V
Han-Brid LWL
- is suitable for all HP Versatile Link (Horizontal Package) trans-mitters and receivers
- Data rates: Standard 12 Mbit/s, suitable for all common field-bus systems
- insert allows integration of HP standard contacts for POF and HCS® fibre
Han-Brid Quintax 3 A
- Possibility to terminate shielded four/eight wires conductors (2 pair STP)
- Possibility to terminate Coax cable with large diameter
- Suitable for all 4-wire bus systems
- Suitable for shielded cable conductor diameter 3 ... 9.5 mm
- Transmission of shielding separately from the hood’s ground
- Connections are carried out acc. to EN 50173, Cat. 5
Han-Brid RJ45 C
- Suitable for standard RJ 45 Plug and Jack, shielded version
- Connections are carried out acc. to EN 50173, Cat. 5
- Connection of the device side can be realised either by a printed circuit board as a modular version or as part of the appliance PCB
- Assembly with standard tools
- Insert for 2 Han-D® male or female contacts offers the combi-nation with electrical bus connector
Han-Brid USB
- Insert for all Han® 3 A hoods with glued seal
- Simple and cost effective termination by plug in patch cable
- Cable tie strain relief
Han-Brid FireWire
- Insert for all Han® 3 A hoods with glued seal
- Simple and cost effective termination by plug in patch cable
- Cable tie strain relief
- Compatibel to IEEE 1394
Han 4 A SC
- Suitable for housings, size Han® 3 A including versions Han®M, Han® EMC and Han® HPR
- Degree of protection up to IP68
- Suitable for HARTING SC contacts
- for Multimode fibre 50 - 62.5 / 125 μm and Singlemode fibre 9 / 125 μm
- 4 full ceramic sleeves for a minimal insertion loss
- 1 mm POF
Categories
Welcome back!
Payment methods
HDC-Shop © 2024