Harting

coaxial male contact 50 Ohm acc. to DIN 41626
use for 50 Ω wires
RG174/U, RG 188 A/U, RG 316/U
for straight solder and/or crimp terminations
mounted in multicontact-module 09140044512

code pin standard
for hoods/housing with one insert or one frame

coding element for Han Q 12/0 male and female inserts

Range of delivery: 20 pieces per frame

coding element for Han Q 2/0

coding pin for Han D, Han DD
only for crimp termination, with loss of one contact
Use of the coding pin prevents incorrect mating to other connectors of the same type.
The male pin should be omitted from the opposing cavity in the male insert.

Coding Pin for Female inserts Han E, Han EE, Han EE, Han Q5
Use only for Crimp inserts!
Use of the coding pin prevents incorrect mating to other connectors of the same type.
The male pin should be omitted from the opposing cavity in the male insert.

coding pin for Han modular

D-Sub turned female contact,
performance level 1
0,08 - 0,21 mm², AWG 28 - 24

replacement for contact 61030000080

D-Sub turned female contact,
performance level 1
0,33 - 0,82 mm², AWG 22 - 18

replacement for contact 61030000113

D-Sub turned male contact, performance level 1
0,25 - 0,52 mm², AWG 24 - 20

replacement for contact 61030000074

D-Sub turned female contact,
performance level 1
0,13 - 0,33 mm², AWG 26 - 22

replacement for contact 61030000096

D-Sub turned female contact, performance level 1
0,13 - 0,33 mm², AWG 26 - 22

 

D-Sub turned male contact,
golden plated, performance level 1
0,33 - 0,82 mm², AWG 22 - 18

replacement for contact 61030000112

D-Sub turned male contact,
golden plated, performance level 1
0,21 - 0,52 mm², AWG 24 - 20

replacement for contact 61030000073

D-Sub turned male contact,
golden plated, performance level 1
0,13 - 0,33 mm², AWG 22 - 26

replacement for contact 61030000094

D-Sub turned male contact,
golden plated, performance level 1
0,13 - 0,33 mm², AWG 26 - 22

 

D-Sub turned male contact, performance level 1
0,08 - 0,21 mm², AWG 28 - 24

replacement for contact 61030000078

depth adjustment gauge tool for BUCHANAN crimping tool

Daniels (DMC) handcrimping tool for turned male and female contacts
4 ident crimp in acc . to MIL 22 520/2-01
wire gauge 0,09 up to 0,82mm², AWG32 - 20

without locator - locator has to be ordered separately!

dummy plugs for panel feed through housings
09 30 016 0408 and
09 30 024 0408

Limiting temperatures -40 °C up to +125 °C
Material plastic, thermoplastic rubber
Colour black

dust protection cover for hoods
with board locks
thermoplastic

acc. to DIN 41626
for Gl-fibre 50/125 µm

acc. to DIN 41626
for 1 mm plastic-fibre

acc. to DIN 41626
for 1 mm plastic-fibre